amzchef YL-IF7CD018S-5B5B5B5B Manual De Instrucciones página 146

cooled down to a safe temperature. It can also be used as an energy saving function if
you want to heat further pans, use the hotplate that is still hot.
Using the Boost
Boost is the function that one zone rising to a larger power in one second and lasting for 5
minutes. Thus you can get a more powerful and faster cooking.
Using the Boost to get larger power
1.Touch the slider to choose heating zone that you wish to boost, an indicator next to the
key
will flash.
2. Touch the
display will show "P " to indicate that the zone is boosting.
power
3. The Boost power will last for 5 minutes. After the boost mode is ended, the zone will go
back to the power stage which was set before boost.
4.If you want to cancel the Boost during this 5 minutes, touch the slider of the heating zone,
an indicator next to the key will flash. And then touch any point of the slider again. The
heating zone will exit the boost function and show the power level which was set before
boost.
for 3 sec , the heating zone will begin to work at Boost mode.The
-144-