Philips baristina BAR300 Manual Del Usuario página 11

Resetting the drink volumes to factory settings
3 Insert the portafilter into the machine until it clicks into place.
4 Press and hold the button of the recipe you want to change for 5 seconds,
until the button starts blinking intermittently.
5 Move the handle firmly to the right until you hear a "click". The machine will
start to grind the coffee beans for the selected beverage into the portafilter.
6 The portafilter automatically moves back into position and the machine starts
to brew the selected beverage.
7 When the cup contains the desired quantity of coffee, press the blinking
button (the button you are programming) again. The selected button will
blink in a short burst to confirm that the new volume has been programmed.
8 The machine is ready when the led stops blinking. Remove the cup and enjoy
your coffee with the adjusted volume.
9 When all leds are off, the portafilter can be removed. Remove the portafilter
from the machine to empty it. Invert the portafilter over a bin and press the
ejection button to remove the coffee puck from the portafilter.
To reset the drink volumes to their factory settings:
English
13