Sears Kenmore 385.17626 Manual De Instrucciones página 30

•
Removing the Hook Cover Plate
Hook cover plate release button
_ Hook cover plate
Slide the hook cover plate release button (_ to the
right, and remove the cover plate @.
\
V_
/
/
/
/
/
• Inserting the Bobbin
[]
_'_)End of thread
_'_ Notch
Notch
Threading chart
Place a bobbin in the bobbin holder with the
thread running off counterclockwise.
Guide the thread into the notch _, on the front
side of the bobbin holder. Draw the thread to the
left, sliding it between the tension spring blades.
Continue to draw the thread lightly until the
thread slips into the notch (-&b. Pull out about 6"
(15 cm) of thread.
Attach the hook cover plate. Check the threading
by referring to the chart (_4_shown on the hook
cover plate.
\
24
/
/
/
%
[]
\
\
\
\
\
\