Controlling Sewing Speed - Sears Kenmore 385.17626 Manual De Instrucciones

II I]]l ::ie [€-! : t
Connecting Machine to Power Supply
Power supply plug
@ Outlet
_j Machine plug
_4z_ P ower switch
F_ Machine socket
F_ Light bulb
Before connecting the power cord, make sure the
voltage and frequency shown on the machine
conform to your electrical power.
1. Turn off the power switch _,.
2. Insert the machine plug (.5_into the machine
socket (4_.
3. Insert the power supply plug (1) into the outlet (3_.
4. Turn the power switch C_)to turn on the power
and sewing light _.
For Your Safety
While in operation, always keep your eye on the
sewing area. Do not touch any moving parts
such as the thread take-up lever, handwheel or
needle.
_ Always turn off the power switch and unplug from
the power supply:
- When leaving the machine unattended.
- When attaching or removing any parts.
- When cleaning the machine.
Do not place anything on the foot control, when
not sewing.
Operating instructions:
"For appliances with a polarized plug (one blade
wider than the other).
To reduce the risk of electric shock, this plug is
intended to fit in a polarized outlet only one way. If
it does not fit fully in the outlet, reverse the plug. If it
still does not fit, contact a qualified electrician to
install the power outlet. Do not modify the plug in
any way."
"Foot Controller Model YC-482J for use with
Sewing Machine Model 385.17626XXX."
XXX - represents numbers 000 through 999.
Controlling Sewing Speed
Sewing speed can be varied by the foot control.
The harder you press on the foot control, the faster
the machine runs.
\
\
/
/
\
/
/
/
/
?
i
E
jl
6