STAMOS MAGITEX 160 Manual De Instrucciones página 26

MAGITEX 200
3 – Wire Speed Adjustment Knob (MIG) | Current Adjustment Knob (MMA, TIG)
Control Panel:
EN
1 – Control Panel
2 – Voltage Adjustment Knob (MIG)
4 – Socket for MIG/MMA/TIG welding torch
5 – Negative output socket
6 –Positive output socket
7 – Plug to change polarity when welding FLUX.
8 – ON/OFF switch
9 – Gas connection
1 – Power ON icon
2 – Overheating icon
3 – MMA work mode icon
4 – SOLID Φ 0.8 work mode icon
5 – SOLID Φ 1.0 work mode icon
6 – FLUX Φ 0.8 work mode icon
7 – FLUX Φ 1.0 work mode icon
8 – LIFT TIG work mode icon
9 – Button to change work modes
/ switch light on and off (hold for
3 seconds)