Tractel Dynafor DMU Manual De Instalación, De Utilización Y De Mantenimiento página 12

C D
EN
O
A
A
K
B
A Individual measurements of the sensors
B Display of the total of the individual measurements
C Tractel logo
D Unit of measurement
E Measurement filter (see 5.9.10.2)
F Threshold trip filter (see 5.9.10.2)
G Built-in buzzer (see 5.9.14)
H Product battery indicator
I Status of the connection to the sensor the furthest
away
J Time
K Sensor batteries indicator
L Identification of sensor (designation + last nine digits
in serial number)
M Sensor capacity in t
N Values of set thresholds (see 5.9.14)
O Measurement sign (null, positive or negative)
The screen can be navigated with the arrow buttons.
The selected sensor is highlighted.
The tare and peak load functions are accessible by
pressing the corresponding buttons when a sensor is
highlighted. It is not possible to activate the two modes
simultaneously. These modes apply to the total if no
sensor is selected.
NB: The display bars are not visible on this
screen.
Pressing the "OK" button briefly changes the
measurement sign.
12
F E G H I
Holding down (for two seconds) the "OK" button on a
selected sensor takes you to the associated single-
sensor screen.
J
Holding down (for one second) the left button deselects
the sensor.
A
5.9.8. Main menu
L
The main menu is entered by holding down (for two
A
§5.9.8
seconds) the "OK" button (item I, fig. 1)
N
M
A
D
A Information menu (see 5.9.9)
B Parameters menu (see 5.9.10)
C Recording menu (see 5.9.11)
D Language menu (see 5.9.12)
E Network menu (see 5.9.13)
F Thresholds menu (see 5.9.14)
To return to the main display, hold down (for one
second) the left button.
5.9.9. Information menu
The "Information" screen is entered by pressing the
"OK" button briefly (item I, fig. 1) when the "Information"
icon is highlighted from the main menu.
Various items of information about the handheld display
and the paired sensors are available. The screen is
navigated by pressing the left and right buttons.
DMU information:
B
E
C
F