Publicidad
Idiomas disponibles
Idiomas disponibles
7.Once a steady stream of cleaning fluid is flowing from the Primer Output Tube
(H), turn the Spray / Prime Switch (F) to the Spray position.
8.Point the spray gun into the waste pail while holding any metal part of the spray
gun firmly to the side of the pail to maintain ground continuity of the gun and pail,
then operate the trigger until the only fluid exiting the gun is cleaning fluid.
9.Change the Spray/Prime Switch (F) to the Prime Position, then repeat steps 7
and 8 until only cleaning fluid is exiting the sprayer.
- 39 -
Publicidad
