VEVOR RP8626 Manual De Instrucciones página 41

10.Place the ON/OFF Switch (B) into the OFF position and unplug the power cord.
CLEANING THE INLET HOSE
1. Remove the screen (K) from the Suction Tube (J) by loosening the hose clamp
and moving it away from the filter.
2. Pull the Inlet Screen (K) out and rinse using the appropriate cleaning fluid.
3. If the Inlet Screen(K) cannot be cleaned, replace with a new Inlet Screen.
CLEANING THE SPRAY GUN
1.Follow the PRESSURE RELIEF PROCEDURE on 9.
2.Use a pair of wrenches and remove the High- Pressure Hose (M) from the Spray
Gun.
- 40 -