VEVOR RP8626 Manual De Instrucciones página 49

MAINTENANCE & REPAIR
DAILY MAINTENANCE
Equipment life is directly related to the quality of maintenance. Follow these
guidelines to ensure a long equipment life.
Always follow the cleaning procedure immediately after use. Paint or water left in
the equipment will cause blockages or corrosion which will make the unit stop
working.
Use the Pressure Relief Procedure when shutting down, adjusting, performing
maintenance or repair.
Ensure you or other operator have read and understand this manual prior to using
the equipment.
Coil the High-Pressure hose after cleaning to prevent damage.
Periodically add multi-purpose light machine oil such as sewing machine oil or ISO
22 oil to the sprayer, as described in the section titled Storing the Sprayer, if being
stored for a long period.
REPAIR
•Have your power tool serviced by a qualified repair person using only identical
replacement parts. This will ensure that the safety of the power tool is maintained.
•Keep all screws, nuts, washers, gaskets, and electrical fittings removed during
repair. These parts are usually not provided with replacement kits.
•Review the section titled Troubleshooting to help identifying any issue.
•Do not operate the sprayer without the motor shroud in place. Replace if
damaged. The motor shroud directs cooling air around the motor to prevent
overheating and insulates the control board to prevent accidental shock.
- 48 -