VEVOR RP8626 Manual De Instrucciones página 8

Check for damaged parts before each use. Check to determine that guards

operate properly and perform their intended function. Check for alignment of
moving parts, binding of moving parts, breakage of parts, mounting, and any other
conditions that may affect its operation. A guard or other part that is damaged
should be properly repaired or replaced by an authorized service center. Following
this rule will reduce the risk of shock, fire, or serious injury.
Inspect power tool cord periodically and, if damaged, it must be replaced only

by the manufacturer or by an authorized service center to avoid risk. Following this
rule will reduce the risk of electric shock or fire.
Have your power tool serviced by a qualified repair person using only identical

replacement parts. This will ensure that the safety of the power tool is maintained.
SPECIFIC SAFETY WARNINGS
AWARNING
DANGERANGER
D!
To reduce the risk of fire or explosion:
Fumes from solvent and paint are flammable and may ignite or explode. Use

only in a well-ventilated area and allow fresh air to move through the work area. Keep the
pump well-ventilated and do not spray the pump assembly.
This sprayer is not intended for use with flammable or combustible
materials used in industrial or fixed location applications such as
factories or paint shops. Follow all applicable federal, state, or
provincial regulations and comply to NFPA 33 and OSHA
requirements if used in these applications.Follow all applicable
federal, state, or provincial regulations and comply to NFPA 33 and
OSHA requirements if used in these applications.
FFIRE SAFETYIRE SAFETY
- 7 -