VEVOR RP8626 Manual De Instrucciones página 44

6. Set the Pressure Control Knob (D) to the Low Spray position.
7. Use a rag to cover the Output Port (E).
8.Place the power ON / OFF Switch (B) to the ON position for FIVE SECONDS,
then turn the power ON /OFF Switch (B) to the OFF position.
9.Set the Spray/Prime Switch (F) to the Prime Position to ensure the oil stays in
the system while being stored.
10.Replace the Primer Output Tube (H) and Suction Tube (J) onto the pump.
11.Wipe the sprayer with a clean cloth and store out of reach of children.
Spray Tips
Always clean tips with compatible cleaning fluid and brush after spraying. Tips may
require replacement after 15 gallons (57 liters) or they may last through 60 gallons
(227liters)depending on abrasiveness of paint.
- 43 -