Preparing For The "Bravia" Sync - Sony HT-SS380 Manual De Instrucciones

Preparing for the
"BRAVIA" Sync
The receiver is compatible with the "Control
for HDMI-Easy Setting" function.
• If your TV is compatible with the "Control
for HDMI-Easy Setting" function, you can
set the Control for HDMI function of the
receiver and playback equipment
automatically by setting the Control for
HDMI function on your TV (page 35).
• If your TV is not compatible with the
"Control for HDMI-Easy Setting" function,
set the Control for HDMI function of the
receiver, playback equipment and TV
individually (page 35).
If your TV is compatible with the
"Control for HDMI-Easy Setting"
function
The Control for HDMI function of the receiver
can be turned on simultaneously by turning on
the Control for HDMI function of the TV.
1
Connect the receiver, TV and playback
equipment via HDMI connection (page
19).
(The respective equipment must be
compatible with the Control for HDMI
function.)
2
Turn on the receiver, TV and playback
equipment.
3
Turn on the Control for HDMI function
of the TV.
The Control for HDMI function of the
receiver and all the connected equipment
are turned on simultaneously. When the
setup is completed, "COMPLETE" will
appear on display panel.
For details on setting the TV, refer to the
operating instructions supplied with the TV.
If your TV is not compatible with
the "Control for HDMI-Easy
Setting" function
,
V/v/B/b
O
MENU
1
Press AMP MENU.
2
Press V/v repeatedly until "HDMI"
appears, then press
3
Press V/v repeatedly until "CTRL
HDMI" appears, then press
4
Press V/v repeatedly until "CTRL ON"
appears, then press
Control for HDMI function is turned on.
5
Set the Control for HDMI function for
the connected equipment to on.
If the Control for HDMI function is already
set to on, you do not need to change the
setting.
For details on setting the TV and connected
equipment, refer to the operating
instructions of the respective equipment.
Notes
• Before you perform the "Control for HDMI-Easy
Setting" on your TV, be sure to turn on the TV and
other connected equipment including the receiver
first.
• If the playback equipment cannot function after
you have made the settings for "Control for
HDMI-Easy Setting", check the Control for
HDMI setting on your TV.
• If the connected equipment do not support the
"Control for HDMI-Easy Setting", but still
supports the Control for HDMI then you need to
set the Control for HDMI function for the
connected equipment before you perform the
"Control for HDMI-Easy Setting" from the TV.
AMP
MENU
or b.
or b.
.
35 US