Preparing For The Hdmi Control Function; Setting [Hdmi Control] Function - Sony DAV-IS10 Manual De Instrucciones

Preparing for the HDMI CONTROL function

To use the HDMI CONTROL function, set up the system and the TV.
Before you use the HDMI CONTROL function, be sure you have performed the following procedures.
1
Make sure that the control unit is connected to the TV (compatible with HDMI CONTROL
function) via the HDMI connection.
2
Turn on the system and the TV.
3
Switch the input selector on the TV so that the signal from the system appears on the
TV screen.
4
Set the respective HDMI CONTROL function for this system and the TV.
For details on this system, see "Setting [HDMI CONTROL] function" below. For details on the
setting up TV, see the operating instructions of the TV. Depending on the TV, the default setting
of the HDMI CONTROL function may be off.

Setting [HDMI CONTROL] function

1
Press DISPLAY when the system is in stop mode.
The Control Menu display appears on the TV screen.
40
GB
X/x,
DISPLAY