Attaching A Lens - Sony a 7S II Manual De Instrucciones

Attaching a lens

Set the power switch of the camera to OFF before you attach or remove the
lens.
1
Remove the body cap from the
camera and the rear lens cap
from the rear of the lens.
• When changing the lens, change the
lens quickly somewhere away from
dusty locations to keep dust or debris
from getting inside the camera.
• When shooting, remove the front lens
cap from the front of the lens.
2
Mount the lens by aligning the
white index marks (mounting
indexes) on the lens and camera.
• Hold the camera with the lens facing
down to prevent dust from entering into
the camera.
3
While pushing the lens lightly
toward the camera, turn the lens
clockwise until it clicks into the
locked position.
• Be sure to put the lens on straight.
Front lens cap
Rear lens cap
White index marks
GB
Body cap
GB
55