Environmental Conditions; Characteristics Of Construction - Chauvin Arnoux MiniFLEX MA200 Manual De Instrucciones

When the indicator no longer lights, the battery must be replaced (see §4.2).

3.8. ENVIRONMENTAL CONDITIONS

The instrument must be used in the following conditions:
% RH
100
95
90
80
75
70
60
50
40
30
20
10
0
-50 -40 -30 -20 -10 0
If the instrument is to be stored or left unused for an extended period, remove the
battery from the housing.
The sensor itself can withstand a maximum temperature of 90°C (by contact).
For indoor use.
Level of pollution: 2.
Altitude: <2000 m.

3.9. CHARACTERISTICS OF CONSTRUCTION

Coil
Length (mm)
Wrapping diameter (mm)
Cord between sensor and housing: 2 m long
Housing:
Overall dimensions: 103 x 64 x 28 mm

Output: a coaxial cable 40 cm long terminated by an insulated female BNC

connector.
Mass of the instrument: approximately 200 g.
Index of protection:
3 2
1: Reference range
2: Operating range
3: Storage range (without battery)
IP 50 as per IEC 60529 (Ed. 92)
IK 04 as per IEC 50102 (Ed. 95)
1
18 28 35
10 20 30 40 50 60 70 80 90
170 250
45 70
6
55
350
100
°C