Instal The Arm; Align The Arm; Manual Manoeuvre - Aprimatic PARK 30 PLUS Manual De Instrucciones Para La Instalación, El Uso Y El Mantenimiento

EN
2.3 INSTALL THE ARM
M14x70
Ø14
M14
TIGHTEN 135Nm

2.4 ALIGN THE ARM

• Electrically connect the control unit (see point 2.8)
• Give the "START" command to position the arm holder
horizontally
• To regulate the adjustable arm holder
Adjustable arm holder
2.5 MANUAL MANEUVER
Always disconnect the electricity before attempting any work on the system.
Releasing the barrier
WITH MOUNTED BOOM ONLY
2. Installation
M6x65
ø6x18x2
ø12x50
M8x25
Ø6x18x2
M6
4,8x13
Ø8
USE THE ADJUSTABLE ARM HOLDER TO ALIGN THE ARM
WITH THE ROAD.
DO NOT CHANGE THE POSITION OF THE LIMIT
SWITCHES AS THEY ARE ALREADY ADJUSTED.
- 10 -
M8
Ø8