SMA SUNNY TRIPOWER 12000TL-US Manual De Uso página 58

10 Troubleshooting
• Remove the ventilation grid. Use a screwdriver
to gently lever open the ventilation grid.
• Clean the ventilation grid with a soft brush, a
paint brush, or compressed air.
3.
Damage to the inverter due to foreign bodies
• Do not remove the ventilation grids permanently, otherwise foreign bodies could
penetrate the enclosure.
4. Wait for the fan to stop rotating.
5. Press the locking tabs on the fan toward the center
of the fan.
6. Carefully remove the fan from the inverter.
7. Release and remove the fan plug.
8.
Damage to the fan due to compressed air
• Clean the fan only with a soft brush, a paint brush, or a damp cloth.
9. After cleaning, insert the fan plug into the pin
connector until it snaps into place.
10. Insert the fan into the inverter until it snaps into
place.
11. Attach the ventilation grids on the right-hand and
left-hand side of the inverter:
58 STPTL-US-10-IA-xx-20
SMA Solar Technology America LLC
NOTICE
NOTICE
Installation Manual