System Setup; Input/Output Assign; Advanced Setup - Pioneer Elite FS-EB70 Manual De Instrucciones

> Before Start > Part Names

System Setup

Advanced Setup

1
TV's remote controller
> Install > Initial Setup
2
> Playback
The unit allows you to configure advanced settings to provide you with an even better
experience.
1. Switch the input on the TV to that assigned to the unit.
2. Press on the remote controller to display the Home screen, then select System Setup
with the cursors on the remote controller and press ENTER.
3. Select the item with the cursor /
ENTER to confirm your selection.
0 Change the initial values for each of the settings with the cursors / .
0 To return to the previous screen, press
4. To exit the settings, press .

Input/Output Assign

■ TV Out / OSD
1080p -> 4K Upscaling When using a TV that supports 4K, video signals input at 1080p
can be automatically upscaled to 4K for output.
"Off (Default Value)": When not using this function
"Auto": Use this function
0 Select "Off" if your TV does not support 4K.
Super Resolution When you have set "1080p -> 4K Upscaling" to "Auto", you can
select the degree of video signal correction from "Off" and
between "1" (weak) and "3" (strong).
OSD Language Select the on-screen display language.
English, German, French, Spanish, Italian, Dutch, Swedish
Advanced Setup | Firmware Update | Others
/  / buttons of the remote controller and press
.
E
N
39