Messages - Sony WX-920BT Manual De Instrucciones

Messages

The following messages may appear or flash during
operation.
INVALID
 The selected operation could be invalid.
READ: Now reading information.
 Wait until reading is complete and playback
starts automatically. This may take some time
depending on the file organization.
(underscore): The character cannot be
displayed.
For CD playback:
CD ERROR: The disc cannot be played. The disc will
be ejected automatically.
 Clean or insert the disc correctly, or make sure the
disc is not blank or defective.
CD NO DISC: There is no disc.
 Insert a disc containing playable files (page 22).
CD NO MUSIC: There is no playable file. The disc
will be ejected automatically.
 Insert a disc containing playable files (page 22).
CD PUSH EJECT: The disc could not be ejected
properly.
 Press  (eject).
or : The beginning or the end of the
disc has been reached.
For USB device playback:
HUB NO SUPPORT: USB hubs are not supported.
IPOD STOP: iPod playback has finished.
 Operate your iPod/iPhone to start playback.
NOT SUPPORT ANDROID MODE
 A USB device not supporting AOA (Android Open
Accessory) 2.0 is connected to the unit while [USB
MODE] is set to [ANDROID].
 Set [USB MODE] to [MSC/MTP] (page 18).
USB ERROR: The USB device cannot be played.
 Connect the USB device again.
USB NO DEVICE: A USB device is not connected or
recognized.
 Make sure the USB device or USB cable is securely
connected.
USB NO MUSIC: There is no playable file.
 Connect a USB device containing playable files
(page 22).
USB NO SUPPORT: The USB device is not
supported.
 For details on the compatibility of your USB
device, visit the support site (page 33).
USB OVERLOAD: The USB device is overloaded.
 Disconnect the USB device, then press SRC to
select another source.
 The USB device has a fault, or an unsupported
device is connected.
For BLUETOOTH function:
BT AUDIO NO DEVICE: The BLUETOOTH device is
not connected or recognized.
 Make sure the BLUETOOTH device is securely
connected, or the BLUETOOTH connection is
established with the BLUETOOTH device.
FILE ERROR: The selected operation could not be
performed.
 Wait for a while, then try again.
NO SUPPORT: The selected operation is not
allowed or supported.
 Make sure the BLUETOOTH device is supporting
HFP (Handsfree Profile).
UNKNOWN: A name or phone number cannot be
displayed.
WITHHELD: The phone number is hidden by the
caller.
27
GB