Sony Cyber-shot DSC-S2000 Manual De Instrucciones página 14

Checking the remaining battery time
A remaining-charge indicalor appears on the LCD screen.
High _ _ _ _
L.ow
• The remaining=charge indicator may not be correct under certain circumstances.
• When [Power Save] is set to [Standard] or [Stamina], if you do not operate tile
camera liar a certain period of time while tile power is on, the LCD screen becomes
dark, then the camera turns off automatically (Auto power=off function).
• The supplied alkaline battery is for trial use only. You may need to purchase an
additional battery for regular camera use.
Battery life and number of still images you can
record/view
ii!ii!ii!ii!,,,,,,,iilll iii!; !!
Recording Approx. 85 Approx. 170
DSC-S2100
Viewing Approx. 370 Approx. 7400
Recording Approx. 95 Approx. 190
DSC-S2000
Viewing Approx. 540 Approx. 10800
• The nmnber of still images that can be recorded is based on tile C1PA standard,
and is liar shooting under the following conditions.
(CIPA: Camera & hnaging Products Association)
- [SteadyShotl is set to [Offl.
D1SP (Screen Display Settings) is set to [Normal].
Shooting once every 3(1 seconds.
-Tile zoom is switched alternately between the W and T ends.
Tile flash strobes once every two times.
-The power turns on and off once every ten times.
New batteries are used at an ambient temperature of 25°C (77°F).
Using Sony "Memory Stick PRO Duo" media (sold separately).
• The values shown liar alkaline battery are based on commercial norms, and do not
apply to all alkaline batteries in all conditions. The values may vary, depending on
tlle battery mauufacturer/lype, environmental conditions, product setting, etc.
6B
14