Md Player Md/Cd Unit (Optional); Playing A Disc - Sony MDX-F5800 Manual De Instrucciones

Ocultar thumbs Ver también para MDX-F5800:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

MD Player
MD/CD Unit (optional)
In addition to playing an MD (MD having group
settings) with this unit, you can also control
external MD/CD (MP3 playable CD) units. If
you connect optional MP3 playable CD units
(eg., MP3 CD changer), you can play MP3 files;
compressed audio files (tracks) with quality of
sound.

Playing a disc

(With this unit)
1
Press (OPEN) and insert the disc
(labeled side up).
2
Close the front panel.
Playback starts automatically.
If a disc is already inserted, press (SOURCE)
repeatedly until "MD" appears to start playback.
To
Stop playback
Eject the disc
Skip tracks
– Automatic
Music Sensor
Fast-forward/
reverse
– Manual Search
Skip GP*
– GP selection
* Available only when an MD containing groups is
inserted in this unit and played.
10
Press
(OFF)
(OPEN) then Z
(SEEK) (–/+)
(./>)
[once for each track]
(SEEK) (–/+)
(m/M)
[hold to desired point]
(5)(GP–) or (6)(GP+)
[once for each group]
[hold to desired group]
To skip tracks continuously, press (SEEK) (+) or
(SEEK) (–), then press again within 2 seconds
and hold.
Notes
• Depending on the condition of the disc, it may not
play back (page 6).
• While the first/last track on the disc is playing, if
(SEEK) (–) or (SEEK) (+) is pressed, playback skips
to the last/first track of the disc.
• When the last track on the disc is over, playback
restarts from the first track of the disc.
(With optional unit)
1
Press (SOURCE) repeatedly to select
"MD (MS*
1
)" or "CD."
2
Press (MODE) repeatedly until the
desired unit appears.
Playback starts.
To
Press
(1)(DISC–) or
Skip discs
(2)(DISC+)
– Disc selection
[once for each disc]
[hold to desired disc]
(5)(ALBM–) or
2
Skip albums*
(6)(ALBM+)
– Albums selection
[once for each album]
[hold to desired album]
*1 MS: MG Memory Stick System-up Player MGS-X1
*2 Available only when an optional CD unit with the
MP3 file control function is connected, and MP3 file
is played.
Cautions when connecting MGS-X1 and MD unit(s)
This unit recognizes MGS-X1 as an MD unit.
• When you want to play MGS-X1, press (SOURCE) to
select "MD." When "MD" appears in the source
display, press (MODE) to select "MS," to start
playback.
• When you want to play an MD unit, press (SOURCE)
to select "MD." If your desired MD unit appears in the
source display, it starts to play. If "MS" or another
MD unit appears in the source display, press
(MODE) to select your desired MD unit, to start
playback.
Notes when connecting MP3 playable CD unit(s)
• If a disc with no MP3 files (tracks) is inserted, "NO
MUSIC" appears in the display and playback of the
next disc starts.
• Before playing a track, this unit reads all track and
album information on the disc. Depending on the
track structure, it may take more than a minute
before playback begins. During this time, "READ" is
displayed. Play will automatically start when reading
is complete.
Note
With an optional unit connected, playback of the same
source will continue on to the optional MD/CD unit.

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido