Blending Tips; Frequently Asked Questions; Food Processor Accessory (Select Models Only) - Oster VERSA 170683 Manual Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Blending Tips

Liquids
Put liquids into the jar first, unless the recipe says otherwise. Add more liquid if
ingredients are not blending properly.
Using the Filler Cap
Do not remove the lid while in use. Instead, open the filler cap to add smaller
ingredients.
Ice Crushing
Without Liquid: use pulse button until you achieve desired results.
With Liquid: Add desired amount of ice cubes and water until ice floats. Blend
on High until you achieve desired results then strain off water.
Working with Hot Foods or Liquids
WARNING:
When you work with HOT FOODS, remove the filler cap to
vent steam. Tilt the lid away from you partially covering the opening. Keep
hands and other exposed skin away from the lid opening to prevent
possible burns.
When you work with HOT LIQUIDS, remove the filler cap and start at a
low speed, and then gradually increase to a faster speed. Do not add liquid
over the 4 cup (1L) level. Always keep hands away from steam.
Ingredient Quantities
Use only the amount of food suggested in the recipes. If you want greater
amounts, prepare in batches. Using larger amounts may overload and strain
the motor. You might also get different results from those described.

Frequently Asked Questions

Why doesn't the blender turn on?
• Make sure the base is plugged in an active power receptacle.
• Verify blinking red light is active after pushing on/off button.
• Make sure the control knob is pressed to start.
How can I prevent liquids from leaking out?
Check to see that the sealing ring is correctly assembled in between
the blade and the jar.
BLSTVB-103_104_13ESM1.indd 10-11
10

Food Processor Accessory (Select Models Only)

Cover – The feed tube allows
the addition of ingredients while
processing.
Food Pusher – Use to safely push
ingredients into Slicing/Shredding
Disk.
S Blade – Specially designed for
chopping and mincing. Grasp the
plastic Center Hub when handling
the Blade. CAUTION: The blade is
very sharp, handle carefully.
Slicing/Shredding Disk – Specially
designed for slicing and shredding.
CAUTION: The blade is very sharp,
handle carefully.
Blade Shaft – For use with Slicing/
Shredding Disk.
Bowl – 5-cup capacity allows for fast
processing of hard-to-chop foods.
Adaptor – Transfers the power
of your Motor Base to the Food
Processor Accessory.
Before Using for the First Time – After unpacking, disassemble unit before using
for the first time.
Wash all parts (except Adaptor) in warm, soapy water.
Rinse and dry immediately. DO NOT IMMERSE ADAPTOR IN ANY LIQUID.
ALL PARTS EXCEPT ADAPTOR ARE TOP RACK DISHWASHER-SAFE.
Food Pusher
Cover
Slicing/Shredding
Disk
Plastic Center Hub
Blade Shaft
S Blade
Bowl
Flexible Seal
Adaptor
Motor Base
11
12/13/13 9:18 AM

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido