Tabla de contenido
Publicidad
eShift with the Intuvia on-board computer
The engaged gear will be shown briefly on the display
English – 4
whenever the gear is shifted.
The drive unit detects the gear shift and briefly reduces the
motor assistance level as a result, which means the gear can
also be shifted at any time under load or on a hill.
If the eBike is brought to a stop from a speed of more than
eShift with manual Shimano Di2 hub
10 km/h, the system may automatically shift down a gear to
gears
a set <Start gear>. The <Start gear> can be set in the basic
settings menu.
Intuvia eShift basic settings menu
You can choose from the following additional basic settings:
eShift with the Intuvia on-board computer
...
<– Start gear +>: The starting gear can be set here. The
The engaged gear will be shown briefly on the display
whenever the gear is shifted.
automatic shift-back function is switched off in the – – posi-
tion. This menu item is displayed only when the on-board
The drive unit detects the gear shift and briefly reduces the
computer is in the holder.
motor assistance level as a result, which means the gear can
also be shifted at any time under load or on a hill.
<Gear adjustment>: This menu item can be used to per-
form fine adjustment of the Shimano Di2. The pre-defined
If the eBike is brought to a stop from a speed of more than
10 km/h, the system may automatically shift down a gear to
a set <Start gear>. The <Start gear> can be set in the basic
settings menu.
Intuvia eShift basic settings menu
You can choose from the following additional basic settings:
eShift with the Nyon on-board computer
...
The gear is always displayed in the eShift field. The gear is
<– Start gear +>: The starting gear can be set here. The
displayed briefly during a gear shift only when the eShift
automatic shift-back function is switched off in the – – posi-
field is not visible (e.g. in settings).
tion. This menu item is displayed only when the on-board
The drive unit detects the gear shift and briefly reduces the
computer is in the holder.
motor assistance level as a result, which means the gear can
<Gear adjustment>: This menu item can be used to per-
also be shifted at any time under load or on a hill.
form fine adjustment of the Shimano Di2. The pre-defined
eShift with the Kiox on-board computer
eShift with the Nyon on-board computer
The gear and switching mode (manual M/automatic A) are
The gear is always displayed in the eShift field. The gear is
always displayed on the start page. If you are on another
displayed briefly during a gear shift only when the eShift
screen, the gear will be briefly shown on the display each
field is not visible (e.g. in settings).
time it is changed.
The drive unit detects the gear shift and briefly reduces the
The drive unit detects the gear shift and briefly reduces the
motor assistance level as a result, which means the gear can
motor assistance level as a result, which means the gear can
also be shifted at any time under load or on a hill.
also be shifted at any time under load or on a hill.
If the eBike is brought to a stop from a speed of more than
10 km/h, the system may automatically shift down a gear to
0 275 007 XES | (06.02.2019)
eShift with the Kiox on-board computer
The gear and switching mode (manual M/automatic A) are
always displayed on the start page. If you are on another
screen, the gear will be briefly shown on the display each
time it is changed.
The drive unit detects the gear shift and briefly reduces the
motor assistance level as a result, which means the gear can
also be shifted at any time under load or on a hill.
If the eBike is brought to a stop from a speed of more than
10 km/h, the system may automatically shift down a gear to
0 275 007 XES | (06.02.2019)
setting range can be found in the operating instructions
provided by the gearing manufacturer. Perform fine adjust-
ment as soon as you hear the gearing make unusual noises.
This menu item is displayed only when the on-board com-
puter is in the holder.
Use the Shimano gearstick to shift gears in manual mode.
...
<Gear vx.x.x.x>: Variable speed transmission software ver-
sion. This menu item is displayed only when the on-board
computer is in the holder. This menu item only appears in
conjunction with an electronic variable speed transmission.
...
Intuvia eShift function displays
You can choose from the following additional functions in
setting range can be found in the operating instructions
the function display (combination of text display and value
provided by the gearing manufacturer. Perform fine adjust-
ment as soon as you hear the gearing make unusual noises.
display):
This menu item is displayed only when the on-board com-
...
puter is in the holder.
<Gear>: The currently engaged gear is shown on the dis-
...
play. The newly engaged gear is briefly shown on the display
each time the gear is changed.
<Gear vx.x.x.x>: Variable speed transmission software ver-
sion. This menu item is displayed only when the on-board
...
computer is in the holder. This menu item only appears in
conjunction with an electronic variable speed transmission.
...
Intuvia eShift function displays
If the eBike is brought to a stop from a speed of more than
You can choose from the following additional functions in
10 km/h, the system may automatically shift down a gear to
the function display (combination of text display and value
a set <Start gear>. The <Start gear> can be set under <My
display):
eBike> → <eShift>.
...
You can carry out fine adjustment of the Shimano Di2 under
<Gear>: The currently engaged gear is shown on the dis-
<Gear adjustment>. The pre-defined setting range can be
play. The newly engaged gear is briefly shown on the display
found in the operating instructions provided by the gearing
each time the gear is changed.
manufacturer. Perform fine adjustment as soon as you hear
...
the gearing make unusual noises.
a set starting gear. The starting gear can be set under
If the eBike is brought to a stop from a speed of more than
<Settings> → <My eBike> → <eShift> → <Start gear>.
10 km/h, the system may automatically shift down a gear to
You can carry out fine adjustment of the Shimano Di2 under
a set <Start gear>. The <Start gear> can be set under <My
<Adjust gear>. The pre-defined setting range can be found
eBike> → <eShift>.
in the operating instructions provided by the gearing manu-
You can carry out fine adjustment of the Shimano Di2 under
facturer. Perform fine adjustment as soon as you hear the
<Gear adjustment>. The pre-defined setting range can be
gearing make unusual noises.
found in the operating instructions provided by the gearing
manufacturer. Perform fine adjustment as soon as you hear
the gearing make unusual noises.
a set starting gear. The starting gear can be set under
<Settings> → <My eBike> → <eShift> → <Start gear>.
You can carry out fine adjustment of the Shimano Di2 under
<Adjust gear>. The pre-defined setting range can be found
in the operating instructions provided by the gearing manu-
facturer. Perform fine adjustment as soon as you hear the
gearing make unusual noises.
EN-95
Bosch eBike Systems
Bosch eBike Systems
Publicidad
Tabla de contenido
