Tabla de contenido
Publicidad
EN-98
eShift with the Intuvia on-board computer
The engaged gear will be shown briefly on the display
whenever the gear is shifted.
The drive unit detects the gear shift and briefly reduces the
eShift with Rohloff E-14 Speedhub
motor assistance level as a result, which means the gear can
500/14
also be shifted at any time under load or on a hill.
If the eBike is brought to a stop from a speed of more than
10 km/h, the system may automatically shift down a gear to
a set <Start gear>. The <Start gear> can be set in the basic
settings menu.
eShift with the Intuvia on-board computer
Intuvia eShift basic settings menu
The engaged gear will be shown briefly on the display
You can choose from the following additional basic settings:
whenever the gear is shifted.
...
The drive unit detects the gear shift and briefly reduces the
<– Start gear +>: The starting gear can be set here. The
motor assistance level as a result, which means the gear can
also be shifted at any time under load or on a hill.
automatic shift-back function is switched off in the – – posi-
If the eBike is brought to a stop from a speed of more than
10 km/h, the system may automatically shift down a gear to
a set <Start gear>. The <Start gear> can be set in the basic
settings menu.
Intuvia eShift basic settings menu
You can choose from the following additional basic settings:
eShift with the Nyon on-board computer
...
<– Start gear +>: The starting gear can be set here. The
The gear is always displayed in the eShift field. The gear is
displayed briefly during a gear shift only when the eShift
automatic shift-back function is switched off in the – – posi-
field is not visible (e.g. in settings).
eShift with the Nyon on-board computer
eShift with the Kiox on-board computer
The gear is always displayed in the eShift field. The gear is
The gear is always displayed in the start page. If you are on
displayed briefly during a gear shift only when the eShift
another screen, the gear will be briefly shown on the display
field is not visible (e.g. in settings).
each time it is changed.
The drive unit detects the gear shift and briefly reduces the
motor assistance level as a result, which means the gear can
also be shifted at any time under load or on a hill.
If the eBike is brought to a stop from a speed of more than
10 km/h, the system may automatically shift down a gear to
a set starting gear. The starting gear can be set under
eShift with the Kiox on-board computer
<Settings> → <My eBike> → <eShift> → <Start gear>.
The gear is always displayed in the start page. If you are on
another screen, the gear will be briefly shown on the display
each time it is changed.
The drive unit detects the gear shift and briefly reduces the
motor assistance level as a result, which means the gear can
also be shifted at any time under load or on a hill.
If the eBike is brought to a stop from a speed of more than
Bosch eBike Systems
10 km/h, the system may automatically shift down a gear to
a set starting gear. The starting gear can be set under
<Settings> → <My eBike> → <eShift> → <Start gear>.
Bosch eBike Systems
tion. This menu item is displayed only when the on-board
computer is in the holder.
Always use the Speedhub gearstick to shift gears with the
...
Rohloff Speedhub 500/14.
<Gear vx.x.x.x>: Variable speed transmission software ver-
Keeping the gearstick pushed down causes the system to
sion. This menu item is displayed only when the on-board
keep shifting gear in increments of three after the first gear
computer is in the holder. This menu item only appears in
change, until the lowest or highest gear is reached.
conjunction with an electronic variable speed transmission.
...
Intuvia eShift function displays
tion. This menu item is displayed only when the on-board
You can choose from the following additional functions in
computer is in the holder.
the function display (combination of text display and value
display):
...
...
<Gear vx.x.x.x>: Variable speed transmission software ver-
<Gear>: The currently engaged gear is shown on the dis-
sion. This menu item is displayed only when the on-board
computer is in the holder. This menu item only appears in
play. The newly engaged gear is briefly shown on the display
each time the gear is changed.
conjunction with an electronic variable speed transmission.
...
...
Intuvia eShift function displays
You can choose from the following additional functions in
the function display (combination of text display and value
display):
The drive unit detects the gear shift and briefly reduces the
...
motor assistance level as a result, which means the gear can
<Gear>: The currently engaged gear is shown on the dis-
also be shifted at any time under load or on a hill.
play. The newly engaged gear is briefly shown on the display
If the eBike is brought to a stop from a speed of more than
each time the gear is changed.
10 km/h, the system may automatically shift down a gear to
...
a set <Start gear>. The <Start gear> can be set under <My
eBike> → <eShift>.
The drive unit detects the gear shift and briefly reduces the
motor assistance level as a result, which means the gear can
also be shifted at any time under load or on a hill.
If the eBike is brought to a stop from a speed of more than
10 km/h, the system may automatically shift down a gear to
a set <Start gear>. The <Start gear> can be set under <My
eBike> → <eShift>.
English – 9
0 275 007 XES | (06.02.2019)
0 275 007 XES | (06.02.2019)
Publicidad
Tabla de contenido
