Tabla de contenido
Publicidad
Safety instructions
Read all the safety information and in-
structions. Failure to observe the safety in-
formation and follow instructions may result
in electric shock, fire and/or serious injury.
Save all safety warnings and instructions for future ref-
erence.
General Advice
eShift is the integration of electronic gear shifting systems
into the eBike system.
Intuvia settings
The function displays and the basic settings menu for the
eShift function have been adapted to provide the rider with
the best possible support.
Nyon settings
You can configure the settings for the eShift function under
<My eBike>.
The gear or the cadence is displayed in the <Ride>, <Fit-
ness> and <Map & Navigation> operating modes. If the
Bosch eBike Systems
field is not displayed, the user is informed of changes by
means of an indication on the display.
eShift mode is activated by pressing and holding the HOME
button. It can only be activated using the operating unit. You
can exit eShift mode again by pressing the HOME button
again.
The software version of the electronic gear shifting systems
is displayed in addition to the other software versions of the
bicycle components under <Help> → <System Info>.
Kiox settings
You can configure the settings for the eShift function in the
settings menu. You can access the settings menu via the
status page. You can only adjust the settings when the bi-
cycle is stopped. Use the select button on the Bosch operat-
ing unit to call up the settings menu. Select the <My eBike>
menu item with the + and – buttons. Under the <eShift>
menu item, you will find various settings (e.g. for the starting
gear) that depend on the gear type.
For Shimano and Rohloff, the gears are shifted via the oper-
ating unit of the respective manufacturer.
For the continuously variable gear hub from NuVinci/enviolo,
the desired cadence can be adjusted at any time (while rid-
ing or stopped) via the Bosch operating unit.
English – 1
EN-93
0 275 007 XES | (06.02.2019)
Publicidad
Tabla de contenido
