Important; Chapter 4 Acceptable Environmental Conditions; Chapter 5 Intended And Forbidden Use - Columbus KS 51|BM 45 Manual De Instrucciones

Vacuum Sweeper
KS 51|BM 45 – KS 71|BM 60
aid of a slanting board (not longer than 80 cm not to damage the dust flaps) placed against the narrowest side of the bench, slide the
machine down until the floor.

IMPORTANT:

Check that the machine has not been damaged. In the case of apparent faults, do not attempt to use the machine and
inform the supplier or the manufacturer.
___________________________________________________________________________________________________
IT IS DUTY OF THE USER TO ENSURE THAT THE WASTE PACKAGING IS DISPOSED OF AND DESTROYED ACCORDING TO THE
SPECIFIC REGULATIONS.
___________________________________________________________________________________________________
ASSEMBLING THE SIDE BRUSH:
1) Take the side brush Detail 2 Fig. 2 out of the waste container Detail A Fig. 1
2) Unscrew and remove the three bolts Detail 1 Fig. 1; assemble the brush so that the three pins fit into the holes Detail 3 Fig. 2
3) Replace the three bolts Detail 1 and screw on tightly to block the brush.
4) Once assembled, the side brush makes contact with Detail 2 Fig. 2 blocking the pulley where to place the elastic belt Detail 5 Fig. 1
Pull the belt Detail 5 forwards and fit it into the plastic pulley Detail 4.
5)
6) Unscrew the screws Detail 6: the purpose of these screws is to keep the belt taut while assembling the brush. Once the brush has been
assembled these screws are no more needed.
Secure the cover Detail 1 Fig. 3 using the three screws Detail 2 Fig. 3.
7)
CHAPTER 4 - PERMITTED ENVIRONMENTAL CONDITIONS
MAXIMUM WORKING TEMPERATURE
IMPORTANT: Do not use or leave parked with temperatures above +45° C (+113° F).
CHAPTER 5 – PERMITTED AND FORBIDDEN USES
PERMITTED USES:
The KS 51/71 sweeping machines are designed for cleaning ground surfaces under the following conditions: types of material to be swept up
from ground: machining residues, dust, grit, dirt in general; types and features of working surfaces (ground): hard, flat and compact surfaces
such as: asphalt, concrete, wood surfaces, metallic surfaces, ceramics, marble, smooth or rusticated plastic materials fibre or synthetic (to
avoid electrostatic charges on these surfaces, natural fibre brushes are essential) cut moquette; type of environment: closed environments
(electric versions), open environments (endothermic versions).
FORBIDDEN USES:
KS 51/71 sweeping machines must not be used under the following conditions:
For gathering up oils, toxic dust or materials and chemical in general (specific authorisation must be requested from the manufacturer
or supplier if the machine is to used in chemical plants or in environments where toxic waste is to be removed from the floors).
The machine must not be used for collecting filiform materials (for example, waste threads from textile production, or long chips from
mechanical machining) since material in this form would be incompatible
Sweeping up lighted cigarette butts or any other object which could cause the combustion of the deposits in the container or filter
cartridges.
The machine must not be used for clearing snow, for washing any type of surface or for use on particularly wet or damp surfaces.
The machine must not be used on surfaces with a gradient of more than 2 %.
The machine must not be used on surfaces which are particularly loose, broken up or gravely.
The machine must not be used in the presence of explosive or inflammable materials (in these circumstances machines bearing FLP
certificates must be used).
The machine must not be used on public highways as it is not equipped for highway homologation.
The machine must not be used in badly lit environments unless fitted with their own lighting unit.
The machine must not be towed or used for towing anything.
The machine must not be used as a raised surface or resting surface for persons or objects.
MINIMUM WORKING TEMPERATURE - 20° C
+ 40° C
with the mechanical rotary action of the central brush.
20
(- 4° F)
(+ 104° F)