Changing Camera Settings; Changing The Screen Display; Changing The Operation Sounds - Sony Cyber-shot DSC-T77 Manual De Instrucciones

Changing the screen display

Touch
1
mode t
(Normal): Displays buttons and
icons
(Simple): Displays only buttons
(Image Only): Hides buttons
and icons
Note
disappears from the screen if [Image Only] playback is selected. To display the buttons,
•
touch the center of the screen. The [Normal] display returns temporarily.
z
Histogram and brightness settings
The following setting can be accessed by touching
Histogram: A histogram is a graph showing the brightness of an image. The graph display
indicates a bright image when skewed to the right side, and a dark image when skewed to the left
side.
Brightness: This sets the backlight brightness ([Normal]/[Bright]). When viewing images in
bright outside light, reset to [Bright]. However, the battery power may decrease faster under such
condition.

Changing the operation sounds

You can set the sound produced when you operate the camera.
Touch
1
t [Main Settings] t
t [Beep] t
mode t
Shutter: Turns on the shutter sound
when you press the shutter button.
On: Turns on the beep/shutter sound
when you operate the touch panel/
press the shutter button.
Off: Turns off the beep/shutter sound.
42
t desired
.
(Settings)
t
t desired
.
.