Tabla de contenido
Publicidad
1)
Accessories for the Smart
Accessory Terminal can also be
attached.
You cannot use the [Self-portrait
Self-timer] function when a flash
HVL-F7S (supplied) or accessories
are attached to the Smart Accessory
Terminal 2.
2)
Do not cover this part during movie
recording.
3)
Do not touch this part directly.
A
Image sensor position mark
B Wi-Fi sensor (built-in)
C Charge lamp
D Micro USB terminal
E HDMI terminal
F LCD screen/Touch panel
G
(Playback) button (28)
H Control dial (32)
I MOVIE button (27)
J Soft key A (32)
K Control wheel (31)
L Soft key C (32)
M Soft key B (32)
GB
10
4)
• You can adjust the LCD screen to
an easily viewable angle and shoot
from any position.
• Tilt the LCD screen upward about
180 degrees when you take a self-
portrait. The 3-second delay self-
timer is automatically selected in
the default setting.
• When storing the LCD screen after
Self-portrait shooting, lower the
LCD screen completely until it fits
against the camera body, then slide
the LCD screen upward until both
the bottoms of the LCD screen and
the camera body are aligned.
4)
Publicidad
Tabla de contenido
