Tabla de contenido
Publicidad
A Battery/memory card cover (13,
20)
B Access lamp (21)
C Memory card insertion slot (20)
D Battery compartment (13)
E Connection plate cover
Use this when using an AC-PW20
AC Adaptor (sold separately).
Insert the connection plate into the
battery compartment, and then pass
the cord through the connection
plate cover as shown below.
• Make sure that the cord is not
pinched when you close the
cover.
F Tripod socket hole
• Use a tripod with a screw length
of less than 5.5 mm (7/32 inch).
You will be unable to firmly
secure the camera to tripods
using screws longer than 5.5 mm
(7/32 inch), and may damage the
camera.
G Speaker
x
Flash HVL-F7S
A Screw
1)
B Flash
1)
C Connector
1)
Do not touch this part directly.
If it is dirty, wipe it off with a soft
clean cloth.
GB
GB
11
Publicidad
Tabla de contenido
