Connecting Machine To Power Source - Singer 3116 Manual De Instrucciones

1
a
b
2
A
3
10
GB

Connecting machine to power source

Connect the machine to a power source as illustrated. (1)
This appliance is equipped with a polarized plug which must be
used with the appropriate polarized outlet. (2)
Attention:
Unplug power cord when machine is not in use.
Foot control
The foot control pedal regulates the sewing speed. (3)
Attention:
Consult a qualified electrician if in doubt as to connect machine
to power source. Unplug power cord when machine is not in use.
The foot control must be used with the appliance by 4C-316B
(110-120V area) / 4C-326G (230V area) / 4C-316C or 4C-326C
(220-240V area) manufactured by Panasonic Co., Ltd.(TW)
Sewing light
Press main switch (A) for power and light on " l ".
IMPORTANT NOTICE
For appliance with a polarized plug (one blade is wider than
the other). To reduce the risk of electric shock, this plug is
intended to fit in a polarized outlet only one way. If it does not
fit fully in the outlet, reverse the plug. If it still does not fit,
contact a qualified electrician to install the proper outlet. Do
not modify the plug in any way.
a. Polarized attachment plug
b. Conductor intended to be grounded