Tabla de contenido
Publicidad
a
b
a
b
C
1
GB
* The darning foot is an optional accessory not included with
your machine.
Move the drop feed control to right to lower the feed dogs.
Set the pattern selector dial to "
Remove the presser foot clamp. (1)
Attach the darning foot to the presser foot holder. The lever (A)
should be behind the needle clamp screw (B). Press the
darning foot on firmly from behind with your index finger and
tighten the screw (C). (2)
First sew around the edge of the hole (to secure the threads) (3).
First row: Always work from left to right. Turn work by 1/4 and
oversew.
A darning ring is recommended for easier sewing and better
results.
A
Note:
B
Free motion darning is accomplished without the sewing
machine internal feed system. Movement of the fabric is
3
controlled by the operator. It is necessary to coordinate
sewing speed and movement of fabric.
2
64
Free motion darning
".
Publicidad
Tabla de contenido
