Changing the settings
Using the timer
Setting the clock
Setting the clock before using the timer.
1
Press SET UP.
The Initial Setup screen is displayed on the main display.
2
Select Clock Setting
3
Select Auto or Manual.
If you select Manual, go to step 4.
• Auto works only when this unit is connected to the
network. Connect to the network if you want to use
automatic time adjustment.
• Auto can be selected even when not connected to the
Internet, but the clock time will not be automatically
updated.
• In order to use the automatic clock adjustment function,
you must conclude a contract with an Internet service
provider.
Use /// or number buttons to adjust
4
the clock, then press ENTER.
• Using / moves the adjusting digit (hour/minute/
2
second/AM, PM
).
• Using / increases or decreases values.
Clock Adjustment
2
21
H:M:S AM/PM
• If you press RETURN, the previous screen will be
displayed.
Setting the wake-up timer
1
Press SET UP.
The Initial Setup screen is displayed on the main display.
2
Select Timer Setting.
The Timer Setting screen is displayed.
Note
1 You'll need to set the clock again if you unplug the unit (or in case of a power failure).
2 The "AM" and "PM" indicators appear only when the Time Format is set to the 12H mode.
3 When the unit is in iPod, FM, Internet Radio, or AUX modes, you can set the timer.
4 Timer Setting need to be done before you turn on the timer.
5 The sleep timer can be set by pressing SLEEP while the remaining time is displayed.
1
Clock Adjustment.
0
AM
3
Use /// or number buttons to adjust
3
the clock, then press ENTER.
The TIMER indicator lights and the wake-up timer has been
set.
• Using / moves the adjusting digit (hour/minute/
2
AM, PM
).
• Using / increases or decreases values.
Timer Setting
7
0
H:M AM/PM
• If you press RETURN, the previous screen will be
displayed.
• The wake-up timer will turn on an input source at the
volume level you selected when you set the timer.
Turning on/off the wake-up timer
1
Press
to turn on the timer.
The TIMER indicator lights.
• To turn off the timer, press
Using the wake-up timer
1
Set the wake-up timer to on.
2
Press STANDBY/ON to turn the power off.
3
At the wake-up time, this unit will turn on
automatically and play the selected input
function.
If this unit is not operated for 60 minutes or more after
playback is started by the wake-up timer, power will
automatically turn off (standby mode).
Using the sleep timer
The sleep timer switches off the unit after a specified time so
you can fall asleep without worrying about it.
•
Press SLEEP repeatedly to select a switch off
time.
Choose between 5 min, 15 min, 30 min, 60 min, 90 min or Off.
13
AM
4
during the timer is on.
5
35
En