Description; Items Supplied; Technical Data - Hilti PUA 83 Manual De Instrucciones

Location of identification data on the appliance
The type designation can be found on the type plate on
the appliance. Make a note of the type designation in
your operating instructions and always refer to it when
making an enquiry to your Hilti representative or service
department.
en

2 Description

2.1 Use of the product as directed
The appliance is designed to charge Hilti batteries of the
types PRA 82 and PRA 801 indoors, in dry conditions.
Use of this appliance to charge batteries of other types
is thus not permissible.
The charging cradle may be used only in conjunction with
the PUA 81, PUA 84 or PRA 85 AC adapters.
Observe the information printed in the operating instruc-
tions concerning operation, care and maintenance.
The appliance is designed for professional use and may
be operated, serviced and maintained only by trained,
authorized personnel. This personnel must be informed

3 Technical data

Right of technical changes reserved.
PUA 83 charger
Power supply (DC)
Frequency
Mains frequency
Weight
Dimensions (LxWxH)
Control
Operating temperature range
Storage temperature
Battery-specific charging charac-
teristics
Max. output voltage
Current output
Charging times
Battery
Max. output voltage
Capacity
Number of cells
8
Type:
Generation: 01
Serial no.:
of any special hazards that may be encountered. The ap-
pliance and its ancillary equipment may present hazards
when used incorrectly by untrained personnel or when
used not as directed.
Tampering with or modification of the appliance is
not permissible.

2.2 Items supplied

12 V
550±90 Hz
50...60 Hz
0.650 kg (1.43 lb)
170 mm (6.7 in) × 160 mm (6.3 in) × 65 mm (2.6 in)
Two status LEDs per charging compartment indicating:
Ready/finished, charging and fault
+5...+35°C (+41°F to +95°F)
-20...+65°C (-4°F to +149°F)
PRA 801
5.4 V
1.8 A
Max. 6 h
PRA 801
3.6 V
8.5 Ah
3
1 Charging cradle
1 AC adapter
1 Operating instructions
PRA 82
3.6 V
1.8 A
Max. 6 h
PRA 82
2.4 V
8 Ah
2