Stihl SR 430 Manual De Instrucciones página 30

English
Conversion from mistblowing to dusting
and spreading mode
Empty and clean the solution
N
container – see "After Finishing
Work".
Close the valve lever (1) for solution
N
feed.
2
Close the metering lever (2) for
N
dusting and spreading mode.
28
Solution container
A
1
B
The selected operating mode is
indicated by the symbols on the
metering unit's housing.
Position A – Mistblowing mode
N
Position B – Dusting and spreading
N
mode
Insert a suitable tool (e.g.
N
screwdriver) in the two recesses
(arrows) to loosen the strainer (1).
Pull the strainer (1) upward and out
N
of the solution container.
2 2
Squeeze the tabs (2) together and
N
pull the lever (3) outwards.
4
Remove the solution container from
N
the metering unit's housing (4) and
turn it to position B (dusting and
spreading mode).
SR 430, SR 450