Utility Mode
1. TG (Tone Generator) Group
This sub-mode contains settings for the DTXPRESS II's tone gen-
erator. This group is divided into the following 5 pages.
1-1. Equalizer (EQ) ................................................. 28
1-2. Mute ................................................................ 28
1-3. Tuning .............................................................. 28
1-4. Volume ............................................................ 28
1-5. Reverb Bypass ................................................ 28
1-1. Equalizer (EQ)
Sets the Master Equalizer (2-band shelving type).
UT TG MASTER
EQ Lo=+ 6iHi=+ 0
q
q EQ Lo (Low Gain)
[Range] +0 to +12 (dB)
w EQ Hi (High Gain)
[Range] +0 to +12 (dB)
1-2. Mute
This setting can be used to mute four types of instruments, K (kick),
S (snare), C (cymbal), and M (others).
UT TG MASTER
MuteK=mS=®C=®M=®
q Drum Mute
[Range] m (mute; Does not produce sound), ® (Produces sound)
* Drum voice types
Drum voices are divided into many groups (categories) in ac-
cordance with the type of sound i.e. kick, snare, etc. For more
information on Drum Voice categories, refer to the [Drum Voice
List] (P. 38).
Drum Voice Category Mute Classification
K, k
S, s
C, H
T, t, P, E, e, L, m
Since drum voices for pads (triggers) are not muted you
can, for example, mute the snare voice of a song and prac-
tice the snare part along with song playback (the snare
voice is delivered when the pad is hit).
28
w
q
K (kick)
S (snare)
C (cymbal)
M (others)
1-3. Tuning
This function sets the master tuning of the tone generator.
UT TG MASTER
Tune C=
0 F=
q
q Tune C (Tune Coarse)
[Range] –24 to 0 to +24
Tuning can be set in increments of a half step.
w Tune F (Tune Fine)
[Range] –64 to 0 to +63
Tuning can be set in increments of about 1.17 cents.
1-4. Volume
This function sets the overall volume level of the tone generator.
UT TG MASTER
Volume=
q Volume
[Range] 0-127
1-5. Reverb Bypass
This function decides whether to bypass the system effect's reverb
or not.
UT TG MASTER
ReverbBypass=off
q ReverbBypass (Reverb Bypass)
off: Does not bypass (functions). Normal operation.
on: Bypasses. Reverb will not be applied to the voice.
0
w
q
110
q