Set The Wireless Network Connection Manually - Yamaha R-N602 Manual De Instrucciones

Connecting to network
Set the wireless network
connection manually
Before performing the following procedure, check the
security method and security key on the wireless router
(access point).
MEMORY
Cursor keys
B / C / D / E
ENTER
HOME
SETUP
SETUP
NOW PLAYING
1
Press A to turn on this unit.
2
Press SETUP.
3
Use the cursor keys (B / C) to select
"Network " and press ENTER.
y
To return to the previous state, press RETURN.
4
Use the cursor keys (B / C) to select
"Connection" and press ENTER.
5
Use the cursor keys (B / C) to select
"Wireless" and press ENTER.
6
Use the cursor keys (B / C) to select "Manual
Setting" and press ENTER.
MANUAL
SSID
7
Use the cursor keys (B / C) to select "SSID"
and press ENTER.
SSID
8
Use the cursor keys to enter the SSID on the
wireless router (access point), and press
RETURN to previous state.
Use the cursor keys (D/E) to move the edit position
and the cursor keys (B/C) to select a character.
18
En
PRESET
ENTER
RETURN
RETURN
OPTION
VOLUME
MUTE
9
Use the cursor keys (B / C) to select
"Security" and press ENTER.
SECURITY
WPA2-PSK(AES)
10
Use the cursor keys (D / E) to select desired
security method and press RETURN.
Settings
None, WEP, WPA2-PSK (AES), Mixed Mode
Note
If you select "None", the connection may be insecure since the
communication is not encrypted.
11
Use the cursor keys (B / C) to select
"Security Key" and press ENTER.
KEY
12
Use the cursor keys to enter the security key
on the wireless router (access point), and
press RETURN to previous state.
If you select "WEP" in step 10, enter either 5 to 13
character string or 10 to 26 hexadecimal digits.
If you select "WPA2-PSK (AES)" or "Mixed Mode"
in step 10, enter either 8 to 63 character string or 64
hexadecimal digits.
Use the cursor keys (D/E) to move the edit position
and the cursor keys (B/C) to select a character.
You can insert / delete a character, by pressing
PRESET i (insert) or PRESET j (delete).
13
Use the cursor keys (B / C) to select
"Connect[ENTER]" and press ENTER to save
the setting.
If "ERROR" appears, check the SSID and security
key on the wireless router (access point) and repeat
from Step 7.
If "ERROR" not appears, a connection is success.
Verify whether the unit is connected to a wireless
network (p. 20).
14
To exit from the menu, press SETUP.