Connecting A Mobile Device To The Unit Directly (Wireless Direct) - Yamaha R-N602 Manual De Instrucciones

Connecting a mobile device to the
unit directly (Wireless Direct)
Using Wireless Direct, this unit can operate as a wireless
network access point that mobile devices can directly
connect to.
MEMORY
Cursor keys
B / C / D / E
ENTER
HOME
SETUP
SETUP
NOW PLAYING
Note
When the unit is connected to the network with Wireless Direct, it
cannot connect to any other wireless router (access point). To
play back contents from the Internet, connect this unit to a
network with a wired router or wireless router (access point).
1
Press A to turn on this unit.
2
Press SETUP.
3
Use the cursor keys (B / C) to select
"Network" and press ENTER.
y
To return to the previous state, press RETURN.
4
Use the cursor keys (B / C) to select
"Connection" and press ENTER.
5
Use the cursor keys (B / C) to select
"WirelesDirect" and press ENTER.
W DIRECT
SSID
6
Press ENTER to check the SSID on this unit,
and press RETURN to previous state.
7
Use the cursor keys (B / C) to select
"Security" and press ENTER.
W DIRECT
WPA2-PSK(AES)
PRESET
ENTER
RETURN
RETURN
OPTION
VOLUME
MUTE
8
Use the cursor keys (D / E) to select desired
security method and press RETURN.
Settings
None, WPA2-PSK (AES)
Note
If you select "None", the connection may be insecure since the
communication is not encrypted.
9
Use the cursor keys (B / C) to select
"Security Key" and press ENTER.
KEY
10
Use the cursor keys to enter the security key
on this unit, and press RETURN to previous
state.
Enter either 8 to 63 character string or 64
hexadecimal digits.
Use the cursor keys (D / E) to move the edit position
and the cursor keys (B / C) to select a character.
You can insert / delete a character, by pressing
PRESET i (insert) or PRESET j (delete).
11
Use the cursor keys (B / C) to select
"Connect[Enter]" and press ENTER to save
the setting.
The SSID and security key information is required
for setup of a mobile device.
When you select the "SSID" in step 6, you can check
the configured SSID on this unit. The SSID of this
unit can be change by using cursor keys (B / C / D /
E).
12
Configure the Wi-Fi settings of a mobile
device.
For details on settings of your mobile device, refer to
the instruction manual of the mobile device.
(1) Enable the Wi-Fi function on the mobile device.
(2) Select the SSID of this unit from the list of
available access points.
(3) When you are prompted for a password, enter the
security key displayed in Step 10.
If "ERROR" appears, check the security key on this
unit and repeat Step 12.
If "ERROR" not appears, a connection is success.
Verify whether the unit is connected to a wireless
network (p. 20).
13
To exit from the menu, press SETUP.
Connecting to network
19
En