Sony FWD-50PX3 Manual De Instrucciones página 84

Problem
Cannot connect to the network.
The display control screen (the
Web screen displaying the
display's GUI) does not appear.
38
GB
Possible Remedies
• Plug the cable firmly into the REMOTE connector or the network
port.
• Select a straight cable or a cross-wired cable, as required by the
network environment.
• Check the network settings of the PC.
• Reset to the default settings by assigning the "All Reset" setting on
the "Setup" setting menu, and then assign the appropriate settings of
the network again.
• Click the refresh or reload button on your Web browser.
• Make sure the IP address is correct.
• Use Internet Explorer 6.0 or later.