Connector Panel (Left Side) - Sony FWD-42PX2 Manual De Instrucciones

Location and Function of Parts and Controls

Connector Panel (Left side)

6
6 VIDEO connectors (BKM-FW10)
S VIDEO IN (Mini DIN 4-pin) : Connects to the Y/
C signal output of a piece of video equipment.
S VIDEO OUT (Mini DIN 4-pin) : Connects to the
Y/C signal input of a piece of video equipment.
VIDEO IN (BNC) : Connects to the video signal
output of a piece of video equipment.
VIDEO OUT (BNC) : Connects to the video signal
input of a piece of video equipment.
AUDIO IN L/R (RCA pin jack) : Inputs an audio
signal. Connects to the audio output of a piece of
video equipment.
7 OPTION1 (VIDEO/COM) slot
This slot supports video signals and the
communication function. The slot accepts optional
adaptors for video signal input/output (such as BKM-
FW10, BKM-FW11, BKM-FW12) as well as optional
adaptors with network management capability (such
as BKM-FW32, BKM-FW50). These adaptors allow
you to control the display unit via the network.
8 OPTION2 (VIDEO) slot
This slot supports video signals. A blank panel is
attached to this slot when shipped from the factory.
The slot accepts optional adaptors for video signal
input/output. For optional adaptors with network
management capability, use the OPTION1 slot 7.
10
(GB)
OPTION1
7
(VIDEO/COM)
Slot
OPTION2
8
(VIDEO) Slot
Optional adaptors (Not supplied)
The connectors marked with 7 and 8 on the
connector panel are slot-in type and can be fitted with
any of the optional adaptors described below.
For details on installation, consult your Sony dealers.
Video/S-Video Input/Output Adaptor BKM-
FW10
Same as pre-installed 6.
COMPONENT/RGB Input Adaptor BKM-FW11
1
2
3
1 Y/G P /C /B P /C /R IN (BNC) : Connects to the
B B R R
analog RGB signal or component (YUV) signal
output of a piece of video equipment or a
computer.
2 HD VD IN (BNC) : Connects to the
synchronization signal output of a computer.
3 AUDIO (Stereo minijack) : Inputs an audio
signal. Connects to the audio output of a piece of
video equipment or a computer.