Setting Up From A Computer - Sony VPL-PX15 Manual De Instrucciones

Setting Up the Projector

Setting Up from a Computer

When you want to type letters using a keyboard, set up
from a computer.
Notes
• Connect a single computer you are using for setups to
the projector if the IP address of the projector is not
changed from the factory-preset one.
• If the browser of your computer is set to "Access the
Internet using a proxy server," enter the IP address of
the projector in the box "Access the Internet without
using a proxy server" when you have access to the
projector from your computer.
• The computer may not accept the password for the
projector, depending on the version of the browser. In
this case, restart the browser.
Opening the setup window
1
Start the computer's browser software (Internet
Explorer 5.0 or later).
2
Type "http://xxx.xxx.xxx.xxx (for the IP address of
the projector)/setup".
If the IP address is not changed from the factory-
preset one, type "http://192.168.0.1/setup" (When
using On-board LAN).
If the number of the IP address starts from 0 (zero),
enter the number without 0.
Example: 192.168.000.001 c 192.168.0.1
The Password dialog box appears.
14
(GB)
3
Enter the Name and Password for Administrator.
If the Password setting is not changed from the
factory-preset one, enter "root" in the Name text
box.
The Setup window appears.
4
Click the icon to be set up.
Set up the items in the same way from the
projector.
5
Click the APPLY button.