Sony VPL-PX15 Manual De Instrucciones página 73

Note
If you are running a presentation using the file
stored in a computer, the file is transferred to the
projector at the time you click the Set Up button. It
will take a little time to display the Set Up Show
window on the computer. How long it takes
depends on the file size. During this time a
message will appear.
5
Click the View button in the File Select window or
click the View Show button in the Set Up Show
window.
The slide show starts.
Note
If you are running a presentation using the file
stored in a computer, the file is transferred to the
projector at the time you click the View button. It
will take a little time to display a slide show on the
projector screen. How long it takes depends on the
file size. During this time a message will appear.
To end the slide show
Click the End Show button. (See page 32 (GB).)
The File Select window returns.
Note
If the message "Projector's memory is full" appears
when clicking the View or Set Up button, delete
unnecessary files stored in the projector using the File
Manager (page 37 (GB)), then try to run the slide show
again. If the message "File size is too large." appears,
reduce the file size, then try to run the slide show
again.
Tip :
You may make it smaller by clicking Option, then
Save from the Tools menu, and unchecking Save Fast
in the PowerPoint application.
About the window displayed while the
presentation is running
The following window is displayed during a
presentation.
4 3
5 6 7
1 NOTES button
Selects to display/remove a speaker's note.
2 SLIDE button
Selects to display/remove a slide show on/from a
computer's display.
3 File name/slide number
Shows the name of a file and which slide is displayed.
2 1
8 9 0 qa
(continued)
31
(GB)