Setting The Password; Assigning An Application Software To The Function Key On The Remote Commander - Sony VPL-PX15 Manual De Instrucciones

Setting the Password

You can set a password for protection against access
from remote network users.
1
From the Start menu, click Control Panel in the
Network Projector window.
2
Double-click the Password icon.
The Password Properties dialog box appears.
3
Specify the Password for Administrator, then enter
the same password again in the Confirm password
text box for Administrator.
The Name of Administrator is preset as "root" at
the factory. It cannot be changed.
4
Specify the Name and Password for User, then
enter the same password in the Confirm password
text box for User.
When you are required to enter the password for
Administrator or User while you are operating the
projector from a computer, enter the Name and
Password which you set in steps 3 and 4.
Assigning an Application
Software to the FUNCTION Key
on the Remote Commander
If you assigned an application to the FUNCTION 1 or
2 key on the supplied Remote Commander, a touch of
the key enables you to start that application. The
screen keyboard is assigned to the FUNCTION 3 key
at the factory, and you cannot reassign or cancel that
assignment.
For detailed information about the screen keyboard, see
page 21 (GB).
1
From the Start menu, click Control Panel in the
Network Projector window.
2
Double-click the Launch Keys icon.
The Launch Keys Settings dialog box appears.
3
Click Browse for the key (1 or 2) to which you
want to assign an application software, then click
the application you want from the application list.
4
Repeat step 3 if you want to assign an application
to the other key.
5
Click the OK button.
13
(GB)