•
Avoid the vehicle's electric parts from getting into contact with water or other liquids.
Avoid riding it near rivers or lakes.
•
Supervise young children to make sure that they do not play with the appliance. Close
supervision is necessary when the appliance is being used by or near children.
CORRECT USE OF THE VEHICLE
•
Do not wear loose clothing, scarves, necklaces or other objects with chains or long laces.
•
Do not drive with objects in your pockets.
•
Do not drive with objects in your hands or mouth.
•
Do not carry other people or objects on the vehicle.
•
Do not place your feet on the ground while driving.
•
Do not get off the vehicle during movement.
•
Do not carry out jumps or stunts with the vehicle.
•
Do not read, write, eat or drink while riding.
•
Do not listen to music while riding the vehicle.
•
Avoid riding the vehicle on unstable or dangerous surfaces such as roads with holes or
with different heights.
•
Do not drive under the effect of drugs or alcohol, when feeling sleepy or when your state
of consciousness and reaction capacity could be altered.
•
Do not ride the vehicle in strange positions and do not use your feet to brake.
4. PRODUCT ASSEMBLY AND ADJUSTMENT
OPENING OF THE HANDLEBAR
1.
The vehicle is shipped folded with the handlebar disassembled.
32
2.
First, unscrew nut 1 and remove screw 2.
3.
Place the handlebar and insert screw 2 with locking nut 1.
4.
Lift the handlebar and press the shutter spring 3, to place the handlebar's neck in its
correct position.
5.
Insert the fixing lever in its groove and rotate it until it is properly locked.
3
NOTE: to fold the handlebar again, carry out these steps in reverse order.
ASSEMBLING THE HANDLEBAR GRIPS
Once the handlebar is assembled vertically, the grips are suspended as shown on the following
figure.
1.
Hold the left grip and pull it up until it is inserted into its position.
2
33
1