Sony VPL-S800U Manual De Instrucciones página 14

Location and Function of Controls
1
4
7
Designate the input from the switcher.
When the SWITCHER/INDEX/LENS selector is
set to INDEX
Used to designate the projector to be operated when
multiple projectors are used in one system.
You can designate the projector by pressing the index
number which you have set on the projector.
Example: When pressing [5] first and then [ENTER],
the next operation will be effective only on
the projector on which the index number
has been set to "5". When operating all the
projectors at the same time, press [ALL]
first, then [ENTER].
1
4
7
Designate the projector to be operated.
When the SWITCHER/INDEX/LENS selector is
set to LENS
Used to adjust focus, zoom, shift and to display or
clear the HATCH pattern on the screen.
Adjust the shift.
Adjust the zoom.
+
SHIFT ZOOM
–
PATTERN
Displays or clears the HATCH pattern.
..........................................................................................................................................................................................................
1) IBM PC/AT is a registered trademark of International Business Machines Corporation, USA.
2) NEC is a registered trademark of NEC Corporation.
3) RM-PJ21 does not function with NEC computers.
14
(EN)
4) Macintosh is a registered trademark of Apple Computer, Inc.
2 3
5 6
SECOND
8
2 3
5 6
8 ALL
Adjust the focus.
+ +
FOCUS
– –
If the VPLL-FM20 or VPLL-FM30 optional lens
is installed
• You cannot adjust the focus using the Remote
Commander. In such case, adjust the focus using the
focus ring of the lens.
• You cannot adjust the zoom.
6 VOLUME +/– keys
7 MENU key
8 ENTER keys
9 Joy stick
Used to move the on-screen cursor or to make various
adjustments.
0 RESET key
!¡ MEMORY key
!™ CONTROL S OUT jack (stereo minijack)
Connect to the CONTROL S IN jack on the projector
when using the Remote Commander as a wired
Remote Commander. In this case, you do not need to
install the batteries since the power is supplied from
the CONTROL S IN jack on the projector.
!£ Infrared transmitter
!¢ MOUSE/MENU switch
Normally, set to MENU. Set to MOUSE when you
operate the mouse function of a computer connected to
the optional RM-PJ20/PJ21 Mouse Receiver from the
Remote Commander.
When the MOUSE/MENU switch is set to MOUSE,
the MENU, ENTER keys, and joy stick function as
follows.
Key
IBM PC/AT
compatible, NEC
MENU Left button
ENTER (front) Right button
ENTER (rear) Right button
Joy stick Corresponds with the movements of the mouse
Function
1) Macintosh 4)
2), 3)
Mouse button
Mouse button
Mouse button