Sony VPL-S800U Manual De Instrucciones página 33

INPUT MEMORY No.
The upper number indicates the memory number of the
current input signal. The lower number indicates the
user memory number.
Memory Preset signal fH(kHz) fV(Hz) Sync
No.
1 Video 60 Hz 15.73
2 Video 50 Hz 15.625
3 15k RGB 60 Hz 15.73
4 15k RGB 50 Hz 15.625
5 VGA-1 31.468
6 VGA-2 31.468
7 VGA-3 31.468
8 8514A/XGA 35.524
9 XGA2-3 61.08
a)
10 VESA VGA 37.86
72 Hz
11 VESA VGA 37.5
75 Hz
12 VESA VGA 43.269
85 Hz
13 S-VGA 56 Hz 35.156
14 S-VGA 60 Hz 37.879
15 S-VGA 72 Hz 48.077
16 S-VGA 75 Hz 46.875
17 S-VGA 85 Hz 53.675
18 VESA XGA 48.363
60 Hz
19 VESA XGA 56.476
70 Hz
20 VESA XGA 60.023
75 Hz
21 VESA XGA 68.677
85 Hz
22 VESA 63.981
1280*1024 60 Hz
23 PS-55-1 46.474
24 PS-55-2 45.995
25 MAC 13"-1 35
26 MAC 13"-2 35
27 MAC 16" 49.724
28 MAC 19" 60.241
29 MAC 21" 68.681
30 Super MAC-1 48.19
31 PC 9801 24.83
Normal
a) VESA is a registered trademark of Video Electronics
Standard Association.
59.94 –
50 –
59.94 Composite sync/
Sync on G
50 Composite sync/
Sync on G
70.086 H-pos V-neg
70.086 H-neg V-pos
59.94 H-neg V-neg
86.95 H-pos V-pos
75.781 H-pos V-pos
72.809 H-neg V-neg
75 H-neg V-neg
85.008 H-neg V-neg
56.25 H-neg V-neg
60.32 H-pos V-pos
72.188 H-pos V-pos
75 H-pos V-pos
85.061 H-pos V-pos
60 H-neg V-neg
70.069 H-neg V-neg
75.029 H-pos V-pos
84.998 H-pos V-pos
60.02 H-pos V-pos
115.2 H-pos V-pos
116 H-pos V-pos
66.669 H-neg V-neg
66.667 Sync on G
74.55 H-neg V-neg
74.927 H-neg V-neg
75.06 H-neg V-neg
72.29 Sync on G
56.4 H-neg V-neg
Memory Preset signal fH(kHz) fV(Hz) Sync
No.
32 PC 9801 32.84
High resolution
33 SONY News-1 63.337
34 SONY News-2 63.337
35 Sun micro 61.8
36 SGI-1 48.732
37 SGI-2 63.839
About the memory function
There are preset input memories which store 37 kinds
of input signals. Also, there are other 150 kinds of user
memories.
When a signal other than the preset signals is input in
the projector, the signal type is automatimally detected
and the picture is displayed on the screen according to
the signal type. Adjust the picture using the INPUT
SETTING menu.
The sets of the adjustments and settings for the input
signal will be saved in the user memory.
When you save more than 150 input signals, the
newest one always overwrites the oldest signal.
The registered user memory numbers are displayed in
the INPUT INFO menu as n NO. ππ.
80 H-neg V-neg
59.978 Sync on G
59.978 H-neg V-neg
65.96 H-neg V-neg
59.94 Sync on G
59.943 Sync on G
33
(EN)