Making Global Settings (System Settings); System Setting Procedure; List Of Settings; Restoring The Factory Settings (Factory Reset) - Boss ME-80 Manual Del Usuario

Making Global Settings (System Settings)

Settings that are shared by the entire ME-80 are called "system
settings . "

System Setting Procedure

1.
Press the [MEMORY/MANUAL] pedal to switch to Manual
Mode (p . 12) .
2.
Press the [EDIT] button to choose the item you want to
set .
The item switches with each press of the [EDIT] button .
3.
Choose the setting value with the [BANK
[BANK ] pedals .
4.
Press the [WRITE] button .
The setting is saved in memory .

List of Settings

Item Display
n0
Knob operation
n1
LO
USB LEVEL
to

Restoring the Factory Settings (Factory Reset)

You can restore the settings in the ME-80 (User patch, tuner
reference pitch, and knob response method) to the values set when
the unit was shipped from the factory .
1.
Press the [MEMORY/MANUAL] pedal to switch to Manual
Mode (p . 12) .
2.
Press the [MOD] pedal while holding down the [EDIT]
button .
FA
" " appears in the display .
3.
Press the [WRITE] button .
The Tuning Guide flashes .
18
] and
Explanation
The value changes immediately as
the knob is turned (factory setting) .
The value changes once the
knob is turned past the position
corresponding to the currently set
value .
Adjusts the level of the audio input
from the computer that will be
L9
mixed with the sound processed by
the ME-80's effects .
Item Display
D0
USB DIRECT
MONITOR
d1
* at power on
D1
B0
USB LOOPBACK
B1
R0
USB DRY REC
R1
c1 c9
to
MIDI channel
settings
c.0 c.6
to
T0
Output settings
while tuning
T1
H0
Control operations
when switching
banks
H1
m0
Control operations
when switching to
Manual Mode
m1
o0
Auto Off settings
o1
4.
Press the [WRITE] button again .
The display flashes and the factory reset is executed .
* Never turn off the power while Factory Reset is in progress .
Explanation
The sound of the ME-80 will not be
output to the REC OUT/PHONES
jack and Gt . AMP OUTPUT jacks .
The sound of the ME-80 will be
output to the REC OUT/PHONES
jack and Gt . AMP OUTPUT jacks .
The input from the computer will
not be output to USB OUT .
The input from the computer will
be output to USB OUT .
The sound of guitar being output
from USB OUT will be processed by
the ME-80's effects .
The sound of guitar being output
from USB OUT will not be processed
by the ME-80's effects .
ch . 1 to ch . 9,
,
ch . 10 to ch . 16
The sound will not be output while
tuning .
The sound will be output while
tuning .
When you press the bank pedal to
switch the bank, the patch doesn't
change although the display
changes . The bank and the patch
number are confirmed by pressing
the number pedal, then the patch
changes to the next one .
The patch changes to the next one
as soon as you press either the bank
pedal or the number pedal .
When you switch to Manual Mode,
the current knob positions will
affect the sound .
When you switch to Manual Mode,
the setting stays the same as when
in Memory Mode .
The power will not turn off
automatically .
The power will automatically turn
off when 10 hours have passed
since you last played or operated
the ME-80 (Factory Setting) .