Single Post Height Adjustable Armrests; Padded Swing-Away Armrests; K.flip-Up Footplate; Freestyle Back - Sunrise Medical Quickie 7R Adjustable Manual De Instrucciones

Q UI C KIE 7R
I. SINGLE POST HEIGHT-ADJUSTABLE ARMRESTS (Option)
Sunrise medical offers several different types of armrests. Fixed, swing-away, and Flip-back armrests. Swing-
away armrests can be detached or can swing away to allow lateral transfers. They are height adjustable
(1" increments)
1. Basic Installation
a. Slide the outer armpost(1) into the receiver (7) mounted to the wheelchair frame.
b. The armrest should lock into place.
2. Height Adjustment
a. Release the upper securing lever. (2)
b. Slide armpad (4) up or down to desired height.
c. Return lever (2) to locked position.
3. Removing the Armrest
a. Squeeze the Release Lever (3) and remove the armrest from the receiver (7).
J. PADDED SWING-AWAY ARMRESTS (Option)
1. Installation
a. The armrest height is determined by the adjustment bolt (A) position.
b. Slide the armrest into the receiver tube (B) on rear of frame until the adjustment bolt
is securely seated (locked) in the receiver tube slot.
2. Swinging Away
a. Lift armrest out of the locked position and rotate to the side
3. Removing Armrest
a. Pull armrest straight out of the receiver.
K. FLIP-UP FOOTPLATE
The footplate (C) can be rotated up towards the user for transfers and adjustment.
L. FREESTYLE BACK(Option)
Back pad Installation
a. Wrap the Backpad (D) around the back shell (E) as shown.
b. Attach the Velcro straps so that the pad is secure.
Make sure that your Authorized dealer, when doing regular maintenance, tightens the back hardware to the
torque specified in section IX-O. Do not use this chair UNLESS you are sure the adjustments are locked in to
this torque.
16
17
18
WARNING
VIII. USE AND MAINTENANCE
15
17
4
6
2
1
7
8
1. Outer armpost
2. Height Release Lever
3. Release lever
4. Armrest pad
5. Transfer bar
6. Side panel
7. Receiver
8. Receiver adjustment hardware
MK-100084 Rev. A
15
5
3
16
17
18