Connection
CAUTION
The screen image may appear reversed.
With the rear view camera you can keep an eye on
trailers, or back into a tight parking spot. Do not use for
entertainment purposes.
Objects in rear view may appear closer or more distant
than in reality.
The image area of full-screen images displayed while
backing or checking the rear of the vehicle may differ
slightly.
2
b
2
1
3
5
4
6
1 Rear view camera (ND-BC8) (sold separately)
2 To video output
3 RCA cable (supplied with ND-BC8)
4 This product
5 Brown (BC IN)
6 Power supply
7 Power cord
8 Violet/white (REVERSE-GEAR SIGNAL INPUT)
Refer to Power cord on page 58
9 Yellow (VIDEO INPUT) 15 cm (5-7/8 in.)
a RCA cable (sold separately)
b View camera (sold separately)
p Connect only the rear view camera to BC IN. Do not connect
any other equipment.
p Some appropriate settings are required to use other view
cameras.
Refer to Setting the rear view camera on page 45
External video component
Using AV input
a
9
4
7
7
9
8
1 This product
2 Yellow (VIDEO INPUT) 15 cm (5-7/8 in.)
3 Red, white (AUDIO INPUT) 23 cm (9 in.)
4 To Yellow
5 To Red, white
6 RCA cables (sold separately)
7 To video output
8 To audio outputs
9 External video component (sold separately)
p The appropriate setting is required to use the external video
component.
Refer to AV input on page 41
1
2
5
3
6
8
Using an AUX input
1
3
6
7
4
8
9
a
b
1 This product
2 AUX input
3 Yellow
4 Red, white
5 Mini-jack AV cable (CD-RM10) (sold separately)
6 To Yellow
7 To Red, white
8 RCA cables (sold separately)
9 To video output
a To audio outputs
b External video component (sold separately)
p The appropriate setting is required to use the external video
component.
Refer to AUX source on page 41
p When connecting an external video component using a mini-
jack AV cable, use a separately sold AUX extension cable as
necessary.
CAUTION
Be sure to use a mini-jack AV cable (CD-RM10) (sold
separately) for wiring. If you use other cables, the wiring
position might differ resulting in disturbed images and
sounds.
2
5
63