Safety Systems; Start Lock-Out; Overload Protection; Overview - Bosch MMB43 Serie Instrucciones De Uso

Safety systems

Start lock-out

The appliance cannot be switched on until
the blender jug has been turned firmly into
place.
Automatic disconnection
The appliance switches off automatically
if the blender jug accidentally becomes
detached during operation.

Overload protection

If the motor switches itself off while the appli-
ance is being used, the overload protection
feature has been activated. Possible causes:
– very large amounts of ingredients,
– appliance operated too long.
If a safety system is activated, see
"Troubleshooting".

Overview

Please fold out the illustrated pages.
1 Motor block
2 Rotary switch with illuminated ring
The illuminated ring flashes slowly when
the appliance is ready for use (on).
The illuminated ring is lit continuously
when the appliance is in operation.
Rapid flashing signals a fault (see
"Troubleshooting").
a MMB43.. :
0/off = Stop
on = Appliance switched on
1 = Lowest operating speed
5 = Highest operating speed
b MMB64.. :
0/off = Stop
on = Appliance switched on
min = Lowest operating speed
max = Highest operating speed
Q = pulse circuit at maximum
speed, hold down switch for required
duration
c MMB65.. :
0/off = Stop
on = Appliance switched on
min = Lowest operating speed
max = Highest operating speed
3 Quick-selection buttons
Preset buttons for optimum results.
For some models:
T = f or crushing ice cubes (crushed
ice). Press button 1x briefly.
U
= F or making mixed drinks
and smoothies. Press button
1x briefly.
For an even more delicate
result, press the button a
second time.
V = F or cutting ingredients in the
universal cutter. Press button
1x briefly.
Q = P ulse circuit at maximum speed.
Hold down button for required
duration.
Pay attention to Figure F !
When the quick-selection buttons
T/U/V have been pressed, the preset
programme runs. To end the programme
early, press any quick-selection button or
turn the rotary switch to 0/off.
4 Cord store
5 Drive
6 Blade holder with blender/cutting
blade and seal
Is used for the blender jug and the
universal cutter jug.
7 Blender jug made of borosilicate glass
Especially heat-resistant, even very hot
ingredients can be processed.
8 Lid with feed tube
9 Measuring cup with scale (max. 50 ml)
10 Smoothie insert*
For the preparation of fruits and other
ingredients into juices and smoothies.
The insert ensures that pips and other
solid ingredients are filtered out and do
not get into the drinks.
11 Universal cutter jug*
* Not all models.
Safety systems en
15