Sound Field Program Parameter Editing; Changing Parameter Settings - Yamaha HTR-5630RDS Manual De Instrucciones

SOUND FIELD PROGRAM PARAMETER EDITING

Changing parameter settings

The initial sound field program settings will provide you
with an excellent listening experience as they are. It is not
necessary to alter these settings, but you can create an
original listening environment by doing so.
Note
• The editable parameters vary depending on the sound field
program you select. Refer to the explanation for the parameter.
TEST
PROG
LEVEL
2
1
Select a sound field program.
PROG
2
Press u / d to select the
parameter you want to
change.
3
Press –/+ to change the
parameter setting.
46
STEREO
VOLUME
PROG
MUTE
SET MENU
VOLUME
1
3
PROG
MUTE
4
Repeat steps 1 – 3 if you wish to alter other
parameters.
Note
• You cannot alter these parameters if the "OPTION 2 MEM.
GUARD" parameter in the Set menu is set to ON. Change this
setting to OFF if you wish to alter any other parameters.